Vision (2x25W) Digital Amplifier

Product Code: TC3-AMP

Product Features

  • Frequency Response (High): 22,000
  • Frequency Response (Low): 80
  • Warranty: 3 Year
  • Barcode: 3446595000006
  • Product Type: Amplifier
Show More
POA
Product Description

By using latest low-impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module. Two Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This 'half-normalled' input disconnects the rear terminal while in use. Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary. Don't let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers). By default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on - for example in hotel guest rooms. A simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input. A remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision's spare remote controls have tone buttons but they do not work with this product. A robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non-technical end users to uninstall it very easily if required. Speaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect. Ideal when you don't have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. Can be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms. Included is a single-gang backbox and surround, or alternatively you can mount it in a double-gang surround with other Techconnect modules.

Warranty: 3 year

Barcode: 3446595000006

Product Type: Amplifier

Product Specification
Amplifier
Barcode 3446595000006
Compliance
Electrical
Form Factor Amplifier
Frequency Response 80Hz to 22,000Hz
Frequency Response (High) 22,000
Frequency Response (Low) 80
General
Hz
In The Box Vision Techconnect (2x25W) Digital Amplifier • 1 x Single-gang Backbox • 1 x Single-gang Surround • 2 x 150mm (5.9 inch) input cables • 2 x Unshielded Speaker cable 5m (16.4 ft) long • 1 x Remote Control with batteries
Input Connector(s) 2 x Stereo inputs (Input 1 duplicated on front and rear)
Input Impedance 8ohms
Interfaces/Ports
Pack Quantity 1
Physical
Power Adaptor Type External
Product Type Amplifier
Signal to Noise Ratio Not Less Than 98dB
Standards RoHS, WEEE, CE/EMC, RCM, FCC
Total Harmonic Distortion (THD) 1% (20Hz to 22Khz)
Voltage/Frequency 100 to 240V AC 50 to 60Hz
Warranty 3 Year
Show More